Ring or full-face gasket projects for bolted flange joints, with the flange form and loading conditions identified.
A nominal pipe size does not fully describe a flange gasket. Provide the flange standard and edition, facing type, inside/outside diameters and bolt-circle details, or a drawing for a non-standard joint.
Gasket thickness and compound must be considered with the flange stiffness, bolt arrangement and process exposure. A flange pressure class is not a pressure rating for an unspecified rubber gasket. Supplier torque tables for a different gasket and joint cannot be transferred directly.
Agree the profile, compound, inspection dimensions and applicable joint validation before ordering. Any allowable bolt load or torque must come from the approved joint procedure; this family page deliberately gives no universal torque value.
No. The joint, gasket construction and service conditions must be evaluated together.
Use the procedure approved for the actual flange, bolts and gasket. A table for another construction may have different assumptions.
These references explain general engineering or regulatory context. They are not Xinwei finished-product specifications, test results or compliance evidence.
SPECIFICATION REFERENCE
These are project discussion inputs. Compound, tolerances and validated performance require agreement for the specific part.
| Selection / definition | Reference and project conditions |
|---|---|
| Flange identity | Standard/edition, nominal size and facing, or a dimensioned drawing |
| Gasket geometry | ID, OD, thickness and bolt holes/bolt circle in mm |
| Hardware | Flange material, bolt size/count and compression limits |
| Process | Fluid, concentration, operating/peak temperature in °C |
| Pressure | Working, transient and test conditions in explicitly named units |
| Assembly acceptance | Approved tightening procedure and leakage test method |
KNOWLEDGE & SELECTION
Knowledge
A practical procurement guide to the installation details that drawings and material names often miss. Learn what to specify for pump tubing, formed elbows, reinforced hoses, appliance connectors, automotive ducts, closures, flexible seals and gaskets—and where product-family descriptions stop short of proving suitability.
Read guide
Knowledge
A practical purchasing guide for defining custom silicone tubing, formed hoses, appliance rubber parts, automotive hoses and seals. Learn which dimensions, operating conditions, interfaces, evidence and acceptance criteria to provide—and where visual similarity or a material name cannot establish suitability.
Read guide
Knowledge
A practical B2B selection guide for separating pump tubing, transfer tubing, formed elbows, reinforced hoses, appliance connections, automotive ducts and molded seals. Learn which application conditions to define, what drawings and evidence to request, and why similar-looking rubber parts should not be treated as interchangeable.
Read guideCONTINUE THE COMPARISON
Silicone gasket projects for removable covers and lids, with the closure gap, cleaning conditions and compound evidence defined.
Perimeter gaskets for rectangular or shaped covers where corner geometry, retention and closure force govern the fit.
Flat-profile gasket projects for covers, plates and stationary interfaces, defined by outline, openings and thickness.
YOUR NEXT COMPONENT
Share your drawing or sample, working conditions, quantity and acceptance requirements with our team.
