PRODUCT DIRECTORY

Rubber & silicone product families

Explore component forms, installation interfaces and project requirements. Open a product series for the information to prepare a technical enquiry.

24 product seriesExplore. Compare. Specify.

pump silicone tubing — product illustration

Food-contact hose projects

Silicone Pump Tubing Projects

Silicone tubing projects for specified peristaltic pump heads, with wall geometry, pump settings and the food-contact task evaluated separately.

Pump interface: Pump/head model, specified tube size and occlusion setting
Tube geometry: ID, OD, wall thickness, concentricity requirement and length in mm

Explore series

silicone hose elbows — product illustration

Food-contact hose projects

Formed Silicone Hose Elbow Projects

Formed silicone connections for constrained food-contact transfer layouts, with the bend, end geometry and cleaning access defined.

Elbow geometry: Angle in degrees, centerline radius and leg lengths in mm
Connections: End IDs/ODs, insertion lengths and fitting details in mm

Explore series

braided silicone hoses — product illustration

Food-contact hose projects

Braided Silicone Hose Projects

Reinforced silicone hose projects where transfer duty, end retention and the complete food-contact construction require assessment.

Geometry: ID, OD, length and tolerances in mm
Construction request: Inner layer, reinforcement and outer layer requirements for feasibility review

Explore series

silicone transfer tubing — product illustration

Food-contact hose projects

Silicone Transfer Tubing Projects

Straight silicone tubing projects for specified food-contact transfer tasks, with geometry, service conditions and evidence reviewed together.

Tube dimensions: ID × OD and length in mm; tolerances and measurement state
Food exposure: Actual food/ingredient type, fat/alcohol content if relevant

Explore series

Appliance rubber parts

Appliance Sealing Sleeves

Short sleeve and collar sealing projects for appliance penetrations and interfaces, with contact length, retention and assembly conditions defined.

Sleeve geometry: ID, OD, length and any lip/flange in mm
Mating parts: Spigot/bore/panel profiles and tolerances in mm

Explore series

Appliance rubber parts

Appliance Connector Hoses

Short molded connections between appliance pumps, tubs, dispensers and valves, with each interface and movement requirement identified.

Connections: Each end/branch profile, ID and clamping length in mm
Geometry: Offset, leg lengths and end clocking in mm/degrees

Explore series

Appliance rubber parts

Appliance Drain Hoses

Drain-path hose projects for appliance discharge routes, with outlet fit, routing, drainage and cleaning exposure specified.

Ends: End IDs/profiles, insertion length and clamping area in mm
Length/route: Free length and installed route with supports in mm

Explore series

Appliance rubber parts

Washing Machine Door Gaskets

Door-to-tub gasket projects for washing-machine assemblies, with retention, drainage, clearance and repeated-cycle fit defined.

Interfaces: Tub, front-panel and door profiles with retaining features in mm
Orientation: Top/bottom marks, port positions and drain locations

Explore series

Automotive hoses

Custom Molded Automotive Hoses

Drawing-led automotive hose projects for branched, offset or multi-bend routes that need a complete interface and validation specification.

Geometry: Controlled CAD/drawing, end labels, route and clocking
Interfaces: Each end/branch ID, wall, insertion length and fitting detail in mm

Explore series

breather vent hoses — product illustration

Automotive hoses

Breather and Vent Hoses

Small-route hose projects for identified ventilation circuits, with vapor, condensate, oil-mist and connection conditions distinguished.

Circuit: Breather/vent function, connected components and vapor composition
Ends/branches: ID, insertion lengths, branch positions and clocking in mm/degrees

Explore series